|
|
1
Xpression III |
Manual turntable with fitted cartridge audio-technica AT 95E
|
Good sound from sound technology
- Tonearm bearing comprises inverted hardened stainless-steel points and sapphire thrust-pads
- Conical carbon fibre armtube allows adjustment of needle azimuth despite fixed headshell
- Vertical tracing angle adjustable
- Acrylic platter
- Low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing
- Motor decoupled to reduce vibration
- Rubber-damped aluminium cones
Features
- Supplied with audio-technica AT 95E cartridge fitted
- Pro-Ject 8.6c tonearm
- Nominal speeds 33 / 45 / 78 r.p.m. (78 optional)
- Gold-plated RCA phono sockets
- Dust cover
- Plinth in dark grey piano-lacquer finish
|
|
| Technical data |
Pro-Ject 1 Xpression III |
| Fitted cartridge |
audio-technica AT 95E |
| Amplifier connection |
MM-input |
| Nominal speeds |
33 / 45 / 78 r.p.m. (78 optional) |
| Dust cover |
yes |
| RCA phono sockets |
yes |
| Rubber-damped aluminium cones |
yes |
| Tonearm |
Pro-Ject 8.6c |
| Tonearm with fibre armtube and sapphire thrust-pads |
yes |
| Effective tonearm length |
8,6 " (218,5mm) |
| Effective tonearm mass |
8,7g |
| Overhang |
18,5mm |
| Supplied counterweight |
cartridge weight 4 - 7g |
| Optional counterweight |
cartridge weight 7 - 12g |
| Downforce range |
10 - 30mN |
| Speed variance |
?0,5 % |
| Wow and flutter |
?0,1 % |
| Signal to noise |
-70dB |
| Platter weight/diameter |
0,9kg/300mm |
| Power supply type |
Mains-fed outboard power supply
220 - 240V, 50 cycles or 100 - 110V, 60 cycles |
| Output voltage |
16V/500mA AC |
| Power consumption |
2W |
| Dimensions (lid open) |
415 x 365 x 405mm |
| Dimensions (lid closed) |
415 x 118 x 320mm |
| Weight |
5,5kg |
|
|
