|
|
2 Xperience |
|
Good sound from sound technology
- Tonearm bearing comprises inverted hardened
- stainless-steel points and sapphire thrust-pads
- Conical carbon fibre armtube allows adjustment
- of needle azimuth despite fixed headshell
- Vertical tracing angle adjustable
- MDF platter with perimeter belt drive, vinyl playing surface and record clamp
- Low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate
- in a sintered bronze bearing housing
- Motor decoupled to reduce vibration
- Sorbothane-damped aluminium cones
Features
- Pro-Ject 9c tonearm
- Nominal speeds 33 / 45 r.p.m
- Record clamp
- Gold-plated RCA phono sockets
- Dust cover
- Transparent acrylic plinth
|
|
| Technical data |
Pro-Ject 2 Xperience |
| Nominal speeds |
33 / 45 r.p.m. |
| Dust cover |
yes |
| Record clamp |
yes |
| RCA phono sockets |
yes |
| Sorbothane-damped aluminium cones |
yes |
| Tonearm |
Pro-Ject 9c |
| Tonearm with fibre armtube and sapphire thrust-pads |
yes |
| Effective tonearm length |
9 " (230mm) |
| Effective tonearm mass |
9,5g |
| Overhang |
18mm |
| Supplied counterweight |
cartridge weight 6 - 9g |
| Optional counterweights |
cartridge weight 4 - 6g |
| Downforce range |
10 - 30mN |
| Speed variance |
?0,5 % |
| Wow and flutter |
?0,08 % |
| Signal to noise |
-70dB |
| Platter weight/diameter |
2kg/300mm |
| Power supply type |
Mains-fed outboard power supply
220 - 240V, 50 cycles or 100 - 110V, 60 cycles |
| Output voltage |
16V/500mA AC |
| Power consumption |
2W |
| Dimensions (lid open) |
460 x 390 x 460mm |
| Dimensions (lid closed) |
460 x 133 x 360mm |
| Weight with |
7,6kg |
|
|
