|
|
Phono Box SE II |
|
MM/MC Phono Pre-amplifier
Good sound from sound technology
- Selectable impedance for MC cartridges
- Selectable load resistance for MM cartridges
- Selectable subsonic filter
- Metal case shields the electronics from vibrational and electromagnetic interference
- Special low-noise ICs used
- Optimal channel separation through dual-mono circuitry
- Gold plated RCA connection sockets
- Outboard power supply included
- DC operation with battery possible
- Available in black and silver
|
|
| Technical data |
Pro-Ject Phono Box SE II |
| Input impedances, MM |
120, 220, 340 and 440pf/47kohm |
| Input impedances, MC |
17, 18, 20, 22, 69, 100 and 220ohms/120pF |
| Output voltage |
300mV/1kHz at 3mV/1kHz (MM input) |
| Gain, MM |
40dB |
| Output voltage |
300mV/1kHz at 0,3mV/1kHz (MC input) |
| Gain, MC |
60dB |
| Noise floor, MM |
95dB (100dB - A weighted) |
| Noise floor, MC |
75dB (80dB - A weighted) |
| THD MM |
0,03% |
| THD MC |
0,1% |
| RIAA-equalisation curve accuracy |
20Hz - 20kHz / max. 0,3dB |
| Subsonic filter |
at 18Hz with 24dB/octave |
| Power supply type |
DC operation with battery
Mains-fed outboard power supply |
| Output voltage |
16V/1.000mA AC |
| Power consumption |
16V/180mA AC |
| DC power source |
from ?12 to ?18V DC |
| Dimension W x H x D |
103 x 72 x 158mm |
| Weight |
1.050g without power supply |
|
|
